Preface - Siemens SIMATIC ET 200SP Manual

Preface

Purpose of the documentation
This manual supplements the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual as well as
the function manuals. All system-wide functions are described in the system manual and in
the function manuals.
The information provided in this manual and the system manual allows you to commission
the CPU 1510SP F-1 PN.
The creation of the safety program and activation of safety operation are described in the
configuration and programming manual SIMATIC Safety - Configuring and Programming
(http://support.automation.siemens.com/WW/view/en/54110126).
Conventions
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
When this device manual refers to the CPU 1510SP-1 PN, we are actually referring to the
CPU 1510SP F-1 PN.
Please also observe the notes marked as follows:
Note
A note contains important information on the product described in the documentation, on
handling the product or on the part of the documentation to which particular attention should
be paid.
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens'
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You can find more information about industrial security on the Internet
(http://www.siemens.com/industrialsecurity).
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You can find more information on the Internet
(http://support.automation.siemens.com).
4
CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)
Manual, 12/2014, A5E35264953-AA