Remote Specifications - Panasonic BT-3DL2550E Operating Instructions Manual

REMOTE Specifications

This monitor permits remote operation via GPI/RS-232C terminal.
GPI terminal
GPI screen items correspond to the following terminals. Use the GPI menu to assign functions to each terminal ( page 39).
Functions assigned to terminals are executed when GND (pin 5) is short-circuited (ON) or open (OFF).
GPI Terminal (9P)
Assigned item Function
UNDEF
Undefined (no function assigned)
MARKER1
Switches marker display defined in "GPI PRESET1"
*1
(
ON/OFF
MARKER2
Switches marker display defined in "GPI PRESET2"
*1
(
ON/OFF
MARKER
Reduces the brightness of the background outside the
*2
marker displayed in "GPI PRESET1" (
BACK HALF
MARKER
Reduces the brightness of the background outside the
*2
BACK BLACK marker displayed in "GPI PRESET1" (
CENTER MARKER
Turns the center marker display on and off. (When
other markers are displayed, this marker is
superimposed on other markers.)
Switches the input line of the main window to VIDEO.
INPUT SEL. VIDEO
2D ONLY
INPUT SEL. SDI1
Switches the input line of the main window to SDI1.
INPUT SEL. SDI2
Switches the input line of the main window to SDI2.
INPUT SEL.
Switches the input line of the main window to YP
RGB.
YP P /RGB 2D ONLY
B R
INPUT SEL. DVI-D
Switches the input line of the main window to DVI-D.
Sets the aspect ratio for SD signal input in the main
SD ASPECT
2D ONLY
window or sub-window single screen display.
Switches between "UNDER" and "NORMAL" scan
SCAN
2D ONLY
modes in the main window or sub-window single
screen display.
*3
Lights the red tally.
R-TALLY
*3
Lights the green tally.
G-TALLY
MONO
Switches between color and monochrome (MONO).
(Disabled during PC signal input)
GAMMA SEL. FILM
Switches the gamma curve in the main window to
FILM mode.
GAMMA SEL. STDIO/
Switches the gamma curve in the main window to
PST
STDIO/PST mode.
Selects the SYNC when using YP
SELECT SYNC
VIDEO input.
2D ONLY
*1 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display,
both markers are displayed.
*2 When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by
the 16:9 marker is controlled.
*3 When "R-TALLY" and "G-TALLY" simultaneously go on, the tally color changes to orange.
Pin number Signal
1 GPI1
2 GPI2
3 GPI3
4 GPI4
5 GND
6 GPI5
7 GPI6
8 GPI7
9 GPI8
page 26) in the "MARKER" menu.
page 26) in the "MARKER" menu.
_ Operating conditions
Level operation: Operates when GND is short-
circuited.
Edge operation: Operates when GND changes from
open to short-circuited.
• When level operation is assigned to more than one
terminal, the function operates as long as one of
the terminals is short-circuited.
Edge operation should hold for 0.2 s or more after a
change.
Operating conditions
—
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
page 26) to 50%. (Short-circuited: ON, Open: OFF)
Level operation
page 26) to 0%. (Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Edge/level operation
Edge/level operation
Edge/level operation
P / Edge/level operation
B R
Edge/level operation
Level operation
(Short-circuited: 16:9, open: 4:3)
Level operation (Short-circuited: UNDER,
Open: NORMAL)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation (Short-circuited:
monochrome, Open: color)
Level operation (Short-circuited: FILM
mode, Open: STANDARD mode)
Level operation (Short-circuited: STDIO/
PST mode, Open: STANDARD mode)
P and RGB- Level operation
B R
(Short-circuited: EXT, Open: INT)
53