Power Supply - Panasonic BT-3DL2550E Operating Instructions Manual

Power Supply

Connecting the power cable
1. Connect the power cable to the AC inlet of the
AC adapter.
Power cable hook
Screw
Use the supplied screw (for securing power cable)
and the power cable hook to secure the power cable
to the AC adapter.
2. Slide the supplied DC cable into the DC OUT
terminal on the AC adapter until it is locked in
place.
3. Slide the DC cable into the DC IN terminal on the
unit until it locks in place.
16
Power cable
4. Connect the power cable to an AC outlet.
5. Turn on the POWER switch. The POWER LED
lights green.
Be sure to use the supplied AC adapter.
Do not use the supplied AC adapter for powering
other devices.
The AC adapter generates heat during use, which is
normal and not a cause for concern.
4
1
2 3
DC IN terminal
Pin number Signal
1 GND
2 +5 V
3 +24 V
4 +24 V