Outline - Panasonic BT-3DL2550E Operating Instructions Manual

Outline

The BT-3DL2550P/E LCD monitor is a 64.8 cm (25.5 inch) full HD LCD display panel designed especially for
broadcasting service and business use.
_ Compact 25.5 type full HD monitor
• The monitor is equipped with a high-resolution (1920 x 1200) IPS LCD panel.
• Efforts to develop a small footprint have resulted in a surprisingly compact design for a monitor with a screen
size of 64.8 cm (25.5 inches).
_ Wide color gamut panel and 10-bit 3D LUT for faithful color reproduction
• The wide color gamut panel increases the origin coordinate accuracy of broadcast standard RGB and 3D LUT
improves color reproduction. It is also compatible with the wide color gamut modes for the Adobe RGB and D-
Cinema (D-Cinema min. Color Gamut) standards.
_ A new image processing engine for improved video quality
• 10-bit image processing accurately and smoothly reproduces color from low to high brightness levels.
• Built-in I/P converter circuit with a delay of less than 1 field minimizes the delay between input signal to picture display.
• Diagonal line compensation processing circuit reduces vertical image degradation and jagged noise in the
diagonal direction.
• High-speed motion response results in crisp image reproduction without blurring.
• The gamma correction of each monitor is set individually prior to shipment.
_ Multi-format image compatibility
• This monitor is equipped with SDI (HD/SD compatible), VIDEO, YP
• It supports both NTSC and PAL TV broadcast systems.
_ 3D display function
Along with a standard 2D display function, this monitor is equipped with a function that displays a left-eye and
right-eye image on each line, creating a 3D (stereoscopic) image when viewed through the 3D Polarized
Eyewear provided.
Due to the characteristics of the Xpol
front of the LCD screen.
The supplied 3D Polarized Eyewear can be worn over regular prescription glasses.
• Compatible with various input types
SIMULTANEOUS (SIMUL)
The monitor converts left-eye and right-eye video input from the SDI1 and SDI2 terminals into a 3D image.
LINE BY LINE
Left-eye and right-eye video is combined into a single image using an external device and the image is input
from SDI1, SDI2, or DVI-D and displayed as a 3D image by the monitor.
Right-eye image
®
polarizing filter, 3D images should be viewed from a position directly in
Left-eye image
Right-eye image
Left-eye image
External
device
P /RGB, DVI-D (HDCP compatible) input jacks.
B R
Monitor
SDI1 (L)
SDI2 (R)
SDI1/SDI2/
DVI-D
Monitor
9