Remote Specifications - Panasonic BT-LH2550 Operating Instructions Manual

REMOTE Specifications

This monitor permits remote operation via GPI/RS-232C terminal.
GPI terminal
GPI screen items correspond to the following terminals. Use the GPI menu to assign functions to each terminal ( page 35).
Functions assigned to terminals are executed when GND (pin 5) is short-circuited (ON) or open (OFF).
GPI Terminal (9P)
Assigned item Function
UNDEF
Undefined (no function assigned)
MARKER1
Switches marker display defined in "GPI PRESET1"
*1
(
ON/OFF
MARKER2
Switches marker display defined in "GPI PRESET2"
*1
ON/OFF (
MARKER
Reduces the brightness of the background outside the
*2
marker displayed in "GPI PRESET1" ( page 23) to 50%.
BACK HALF
MARKER
Reduces the brightness of the background outside the
*2
marker displayed in "GPI PRESET1" ( page 23) to 0%.
BACK BLACK
CENTER MARKER
Turns the center marker display on and off. (When
other markers are displayed, this marker is
superimposed on other markers.)
INPUT SEL. VIDEO
Switches the input line of the main window to VIDEO.
INPUT SEL. SDI1
Switches the input line of the main window to SDI1.
INPUT SEL. SDI2
Switches the input line of the main window to SDI2.
INPUT SEL.
Switches the input line of the main window to YP
YP P /RGB
B R RGB.
INPUT SEL. DVI-D
Switches the input line of the main window to DVI-D.
SD ASPECT
Sets the aspect ratio for SD signal input in the main
window or sub-window single screen display.
SCAN
Switches between "UNDER" and "NORMAL" scan
modes in the main window or sub-window single
screen display.
*3
R-TALLY Lights the red tally.
*3
Lights the green tally.
G-TALLY
MONO
Switches between color and monochrome (MONO).
(Disabled during PC signal input)
GAMMA SEL. FILM
Switches the gamma curve in the sub-window to FILM
mode.
GAMMA SEL. STDIO/
Switches the gamma curve in the main window to
PST
STDIO/PST mode.
SELECT SYNC
Selects the SYNC when using YP
VIDEO input.
*1 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display,
both markers are displayed.
*2 When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by
the 16:9 marker is controlled.
*3 When "R-TALLY" and "G-TALLY" simultaneously go on, the tally color changes to orange.
48
Pin number Signal
1 GPI1
2 GPI2
3 GPI3
4 GPI4
5 GND
6 GPI5
7 GPI6
8 GPI7
9 GPI8
page 23) in the "MARKER" menu.
page 23) in the "MARKER" menu.
■ Operating conditions
Level operation: Operates when GND is short-circuited.
Edge operation: Operates when GND changes from
• When level operation is assigned to more than one
terminal, the function operates as long as one of
the terminals is short-circuited.
Edge operation should hold for 0.2 s or more after a
change.
Operating conditions
—
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Edge/level operation
Edge/level operation
Edge/level operation
P / Edge/level operation
B R
Edge/level operation
Level operation
(Short-circuited: 16:9, open: 4:3)
Level operation (Short-circuited: UNDER,
Open: NORMAL)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation (Short-circuited:
monochrome, Open: color)
Level operation (Short-circuited: FILM
mode, Open: STANDARD mode)
Level operation (Short-circuited: STDIO/
PST mode, Open: STANDARD mode)
P and RGB- Level operation
B R
(Short-circuited: EXT, Open: INT)
open to short-circuited.