Registering A Unit - Panasonic KX-TH102-C Operating Instructions Manual

Programmable Settings

Registering a unit

Registering the handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
Important:
L Before registering a compatible
Panasonic unit to the base unit, we
recommend you change the PIN (page
52) so that other Bluetooth devices in
the area are not accidentally registered
at the same time.
L If you have already canceled the
handset registration at the previous
base unit, perform steps 2 and 3 only.
1
Handset:
{MENU} (center of joystick) i h i
{SELECT} i "Registration" i
{SELECT} i "Registration" i
{SELECT}
2
Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
L After {INTERCOM} starts flashing,
the rest of the procedure must be
completed within 2 minutes.
3
Handset:
Press {OK}, then wait until the handset
beeps.
L If you have changed the PIN, enter it
and press {OK}, then wait until the
handset beeps.
54
For assistance, please visit http://www.panasonic.com/phonehelp
Deregistering a unit
Deregistering a handset
o
Y
Handset
A handset can cancel its own registration.
1
{MENU} (center of joystick) i h i
{SELECT}
2
"Registration" i {SELECT}
3
"Deregistration" i {SELECT}
4
{3}{3}{5} i {OK}
Deregistering another device
Base unit
The base unit can cancel a registered unit
(cordless camera, USB adaptor, Bluetooth
cellular phone, Bluetooth headset).
1
{MENU} i h i {SET}
2
"Deregistration" i {SET}
3
Select the desired device. i {SET}
4
{3}{3}{5} i {SET} i {STOP}