How To Use Your Wireless Keypad - Honeywell DOMONIAL User Manual

How to use your wireless keypad ?

The keypad is used to arm, totally or partly, and to disarm your security system by means of an
access code chosen at the installation stage.
CHARACTERISTICS
Power requirement:
one 3V lithium CR 123 type battery
Weight: 130 grs
OPERATION
To use the keypad you must know the access code
chosen at the installation stage.
ARMING VIA THE CODE KEYPAD
Press "ARM" key of the keypad and enter your access code.
A high-pitch beep confirms the entry of each digit,
The keypad confirms the validity of the code by its green light,
- The audible confirmation
emitted by the signalling equipment.
Always make sure that your arming the system is followed by the audible confirmation. Your
house will be under effective protection about 2 minutes after you have armed the system.
If your system is equipped with a TAG Reader, presenting the TAG in front
of the keypad can take place of entering code.
To arm the Total zone
To arm the Partial zone
To arm the Annex zone
is simultaneously
12
2
1 3
4 5 6
7 8 9
0
SOS