Honeywell DOMONIAL User Manual page 5

Light indicator
The front cover of the control panel
features LEDS indicators which show
the status of your security system.
1- LED I
NDICATOR
ON : The Control Panel is supplied by the Mains power
OFF : There is a Mains Power Failure – The Control Panel is supplied by its built – in battery
2- LED I
NDICATOR
ON : The system is totally armed
OFF : The system is disarmed
BLINKING : The system is Part Armed
3- LED I
NDICATOR
BLINKING : It means that one of the window or door protected by a magnetic contact is
opened. It blinks until the window or door get closed
4- LED I
NDICATOR
ON : It means that an alarm occurred during the ARMING mode
BLINKING : It means that an alarm occurred during the Part arm mode
The indicator remains ON until the next arming
5- LED I
NDICATOR
ON : It indicates a fault on a technical channel
BLINKING : It indicates a fault on the system ( Battery fault, Supervision, Tamper, Phone line
failure or Radio Jamming )
The indicator remain ON or BLINKING until the End of the technical or system fault
"A
C MAINS POWER
"S "
YSTEM ARMED
"O
PENED DETECTOR FAULT
"A
LARM MEMORY
"T
ECHNICAL FAULT
"
"
"
"
5