Honeywell DOMONIAL User Manual page 13

On some keypad models, presenting the TAG more than 2 sec. will arm the system without pressing the
ARM key.
If you ask your installer for the corresponding configuration, you will be able to arm your
security sys
tem by a mere push on the "ON" key.
DISARMING VIA THE CODE KEYPAD
To enable you to get to the keypad without triggering an alarm, your installer has pro-
grammed an entry delay of a few seconds.
Enter your code or present the TAG.
A high-pitch beep confirms the entry of each digit,
The keypad confirms the validity of the code by its green light,
- The audible confirmation
emitted by the signalling equipment.
CODE CHANGING VIA THE CODE KEYPAD
You can change the 4 digits of your access code at any time.
Press key :
+
Your personal code
13
is simultaneously
Master user ID = 1