1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Security System
  5. Domonial
  6. User manual

Honeywell Domonial User Manual

Hide thumbs Also See for Domonial:
Table of Contents

Advertisement

Quick Links

See also: User Manual
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Honeywell Domonial

Summary of Contents for Honeywell Domonial

  • Page 1 User Manual...
  • Page 2 Congratulations on the purchase of your DOMONIAL security system. This system is designed to operate on an authorised radio frequency and will in no way endanger the user. To make the best out of your system we advise you to read this manual carefully.
  • Page 3 INDEX Introduction to the security system ① Understanding the system tones ② How to use the wireless keypad with display* ③ How to use the wireless keypad with prox re a d e r * ④ How to use the keyfob* ⑤...

  • Page 4: Introduction To The Security System

    Introduction to the security system ① The Domonial control panel/communicator unit is the brain of your security system. It exchanges information with the associated wireless peripherals. The control panel c e n t r a l i s e s the data sent by the detectors, records the arming and disarming operations and communicates with the Alarm Receiving Centre.

  • Page 5: Indicator Lights

    Indicator lights The front cover of the control panel features LED indicators which show the status of your security system. Indicators 2, 3, 4 and 5 show the faults, which are occurring or in memory for one set at a time. Indicators are only active when the system is unset and during the arming and disarming phases.

  • Page 6: Understanding The System Tones

    Understanding the system tones ② S I R E N S A siren is an effective deterrent due to its power and very irrating tone. The system has a siren built in the control panel. An optional remote siren can be added. In addition, the panel built-in siren emits an audible confirmation tone when arming and disarming the security system and a fire tone when a smoke detector is t r i g g e red.

  • Page 7: System Tones

    SYSTEM TONES Sequence of 3 modulated sounds When arming, total set, confirms that the TOTAL SET control panel has received a valid code or ARMING TAG and is preparing to arm total set. Duration : 4 seconds PART SET Sequence of 2 modulated sounds ARMING When arming the part set, confirms that the control panel has received a valid code or...

  • Page 8: How To Use The Wireless Keypad With Display

    How to use the wireless keypad with display* ③ The wireless keypad with display offers a complete range of tools to manage your alarm system, from normal operation to dedicated user functions. The keypad is used to arm and to disarm your security systemusing a valid access code or key TAG.
  • Page 9 How to use the wireless keypad with prox re a d e r * ④ The keypad is used to arm and to disarm your security system using a valid access code or key TAG. To use all the functions of the keypad you must have the master code chosen during the installation or have the master key TAG.
  • Page 10 ● ARMING WITH FAULT If the system diagnoses a fault on arming, arming is prevented. Faults include system faults, tam- pering and triggering of detectors. ✔ A tone indicating a fault is emitted by the panel siren after the arming request, instead of the arming tone.

  • Page 11: Duress Code

    ● RESETTING THE SYSTEM AFTER AN ALARM If LED 3, 4 or 5 is flashing slowly on your control panel, this indicates an alarm has occurred and restored. When an alarm is in memory, the system will not arm until it has been reset.
  • Page 12 ● CHANGING OR SETTING ADDITIONAL CODES The keypad can have up to 10 users. User 1 has the master code or master TAG. To change or set additional user codes, you need to enter programming mode ✔ Press key : simultaneously ✔...
  • Page 13 ✔ Enter the master code or present the master TAG (user 1) ✔ Select and enter an existing single digit user ID (0-9) ✔ Present the new key TAG ✔ A double beep on the keypad will confirm that the new TAG is programmed and replace the previous TAG if any.

  • Page 14: How To Use The Keyfob

    ⑤ How to use the keyfob* The keyfob can be used to arm or disarm your security system to trigger an audible or silent alert as well as control electrical equipment remotely** ● ARMING*** ✔ Press key : ✔ The indicator light on the keyfob comes on briefly when you release the button - The arming tone is emitted by the panel siren.

  • Page 15: Panic Alarm

    ● DISARMING *** ✔ Press key : ✔ The indicator light on the keyfob comes on briefly when you release the button. - The disarming tone is emitted by the panel siren. ● PANIC ALARM These keys enable you to send an instant alarm if you need urgent assistance at home. ✔...
  • Page 16 Understanding detectors operation ⑥ Pir detector A PIR DETECTO R is a motion detector, which reacts to the temperature fluctua- tions caused by a person in motion If the detector’s light indicator is setup, it will flash when movement is detected. In order to save the batteries of the wireless detectors, the next detection will be delayed for a few minutes.
  • Page 17 Remote control is authorised only after you have entered a valid code. The Domonial control panel picks up your call after the number of rings configured by the installer or after it has been called twice successively.
  • Page 18 • Press keys for annex set arming Arming is confirmed as soon as you can hear a melody. ● REMOTE CONTROL OF ELECTRIC EQUIPMENT* • Select the N of the equipment (101 to 112) by pressing keys • One short beep informs you that you equipment is active.

  • Page 19: Maintenance And Recommendations

    Maintenance and recommendations ⑧ ● Check regularly your system (once a month or follow your operator’s specifications) ● Avoid shocks for all the components and more especially avoid dropping the remote keyfob. ● Do not immerse. ● To clean the components use a damp rag only (no detergent). ●...

Table of Contents