Stairville novaWASH Quad LED User Manual page 28

Operating
DMX Address
Channel Mode
Show Mode
Slave Mode
28
Press the [MENU] button up to when 'DMX Address' is showing up in the display. Press the
[ENTER] button and the display will blink. Use the [UP] and [DOWN] buttons to change the
DMX512 address. Once the address has been selected, press the [ENTER] button to store. To
return to the main functions without any change press the [MENU] button or wait for one
minute.
Press the [MENU] button up to when 'Channel Mode' is showing up on the display. Press the
[ENTER] button and the display will blink. Use the buttons [UP] and [DOWN] to select 'Mode 1
(9)' or 'Mode 2 (16)' . Once selected, press the [ENTER] button to store. To return to the main
functions without any change press the [MENU] button or wait for one minute.
Press the [MENU] button up to when 'Show Mode' is showing up on the display. Press the
[ENTER] button and the display will blink. Use the [UP] and [DOWN] buttons to select 'Show 1' ,
'Show 2' , 'Show 3' or 'Show 4' . Once selected, press the [ENTER] button to store. To return to
the main functions without any change press the [MENU] button or wait for one minute.
Press the [MENU] button up to when 'Slave Mode' is showing up on the display. Press the
[ENTER] button and the display will blink. Use the [UP] and [DOWN] buttons to select 'Master' ,
'Slave 1' or 'Slave 2' . Once selected, press the [ENTER] button to store. To return to the main
functions without any change press the [MENU] button or wait for one minute.
moving head