Stairville novaWASH Quad LED User Manual page 31

Manual Test
Offset Menu
White Balance
Press the [MENU] button up to when 'Manual Test' is showing up on the display. Press the
[ENTER] button and 'PAN' will blink. Use the [UP] and [DOWN] buttons to select 'Tilt' , 'Red' ,
'Green' , 'Blue' , 'White' , 'Strobe' or 'Dimmer' . Press the [ENTER] button to enter, then press the
[UP] and [DOWN] buttons to adjust the value and press the [ENTER] button to select the next
option. To return to the functions press the[ MENU] button.
In the 'Manual Test – Pan' or 'Manual Test – Tilt' submenu, press the [ENTER] button to open
the menu for setting the offset values for Pan and Tilt. Press the [UP] and [DOWN] buttons to
set the value in a range from 0 to 255 and press the [ENTER] button to store the value.
Press the [MENU] button up to when 'White Balance' is showing up on the display. Press the
[ENTER] button and 'RED' will blink. Press the [UP] und [DOWN] buttons to adjust the value.
Press the [ENTER] button to store and 'Green' will blink on the display. Press the [UP] und
[DOWN] buttons to adjust the value. Press the [ENTER] button to store and 'Blue' will blink on
the display. Press the [UP] and [DOWN] buttons to adjust the value, and press the [ENTER]
button to store. To return to the functions press the[ MENU] button.
novaWASH Quad LED
Operating
31