Graco Reactor E-10hp Instructions Manual page 47

Replace Temperature Control Modules
NOTICE
Before handling assembly put on a static conductive
wrist strap to protect against discharge which can
damage assembly. Follow instructions provided with
wrist strap.
1. See Before Beginning Repair, page 40.
2. Remove heater shroud (89) and electronics cover
(55).
3. Put on static conductive wrist strap.
332144E
4. Disconnect all cables and connectors from tempera-
F
IG
55
5. Remove hex nut (56) and replace defective module.
89
6. Install new module in reverse order. Connect all
ti21845a
ture control module (59).
. 13
cables and connectors.
Repair
59
56
ti21844a
47