Graco Reactor E-10hp Instructions Manual page 35

PROBLEM
Display does not respond properly to
button pushes.
Fan not working.
332144E
CAUSE
Poor display connection.
Display cable damaged or corroded.
Ribbon cable on display circuit board
disconnected or broken.
Broken display button.
Loose wire.
Defective fan.
Troubleshooting
SOLUTION
Check cable connections, F
page 73. Replace damaged cable.
Clean connections, F . 23 on page
IG
73. Replace damaged cable.
Connect cable, F . 23 on page 73,
IG
or replace.
Replace, page 43.
Check fan wire.
Replace, page 55.
. 23 on
IG
35