Net Ethernet Configure <Interface_Name; Net Lan Ipv4 Configure - D-Link DWC-2000 Cli Reference Manual

7.10 net ethernet configure <interface_name>
S.No Command Name Description
1 <interface_name> Ethernet configuration mode.
2 save
3 exit
4 cancel
5 vlan-enable
6 native-vlan
7 vlanid

7.11 net lan ipv4 configure

S.No Command Name
1 save
2 exit
3 cancel
4 static
5 static address
6 static subnet_mask
7 dhcp
8 dhcp mode
9 dhcp start_address
reserved IP entry.
Saves Ethernet configuration changes.
Saves Ethernet configuration changes and
exit current mode.
Rolls back configuration changes.
Enables/disables VLAN for this interface.
Enables/disables the native VLAN status.
Set VLAN Id.
Description
Saves LAN configuration
changes.
Saves LAN configuration
changes and exits current
mode.
Rolls back LAN
configuration changes.
Configures LAN Settings.
Sets system LAN IP
address.
Sets a system LAN subnet
mask.
Configures DHCP Settings.
Sets DHCP mode.
Sets DHCP server's start
address.
MAC address AA:BB:CC:DD:EE:FF where
each part is in the range 00-FF
Type and Description
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
DHCPv4 modes.
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
91
Type and
Description
String.
Boolean choice.
Boolean choice.
Unsigned integer