Net Radvd Pool Delete <Row_Id; Net Routing Dynamic Configure - D-Link DWC-2000 Cli Reference Manual

Wireless controller
Hide thumbs Also See for DWC-2000:
Table of Contents

Advertisement

5
prefix_type
6
sla_id
7
prefix_address It specifies the IPv6 network address.
8
prefix_length
9
prefix_life_time
7.21 net radvd pool delete <row_id>
S.No Command Name
1
<row_id>

7.22 net routing dynamic configure

S.No Command Name
1
save
2
exit
3
cancel
4
direction
5
version
6
authentication_enable
7
first_key
8
first_key id_number
9
first_key authentication_id First MD5 Authentication key.
10
first_key valid_from
first_key valid_from
11
month
Allows the prefix type to be selected as either 6to4
or Global/Local/ISATAP.
The SLA ID (Site-Level Aggregation Identifier) in
the 6to4 address prefix is set for the interface ID on
which the advertisements are sent.
The prefix length variable is a decimal value that
indicates the number of contiguous, higher order
bits of the address that make up the network
portion of the address.
The length of time over which the requesting router
is allowed to use the prefix.
Description
radvd pool configuration mode.
Description
Saves dynamic route changes.
Saves dynamic routes changes
and exits current mode.
Rolls back RIP configuration
changes.
RIP direction none, In only, out
only, both.
Rip version
Enables/disables authentication
for RIP-2B/2M.
First MD5 key.
First MD5 key Id.
First MD5 key not valid before
entered date.
Month in which MD5
authentication key validity starts.
99
ipv6 prefix
type.
Unsigned
integer.
String.
Unsigned
integer.
Unsigned
integer.
Type and Description
Unsigned integer.
Type and
Description
RIP direction
RIP version
Boolean choice.
Unsigned integer.
String.
Month in the format
MM(01-12)

Advertisement

Table of Contents
loading

Table of Contents