D-Link DWC-2000 Cli Reference Manual page 21

The command "show POP3-Settings ?" at the CLI prompt, gives a
description of all the show commands in the branch POP3-Settings , these are
as follows:
1 show POP3-Settings
The command "show POP3-Trusted-CA ?" at the CLI prompt, gives a
description of all the show commands in the branch POP3-Trusted-CA , these
are as follows:
1 show POP3-Trusted-CA Display POP3 Trusted Certificates.
The command "show system ?" at the CLI prompt, gives a description of all
the show commands in the branch system , these are as follows:
1 show system logging
2 show system logging remote
3 show system logging remote setup
4 show system logging facility
show system logging facility
5
setup <facility>
6 show system logging ipv4
7 show system logging ipv4 setup
8 show system logging ipv6
9 show system logging ipv6 setup
show system
10
remote_management
show system
11
remote_management setup
12 show system snmp <agentIP>
13 show system status
14 show system dashboard
15 show system time
Display POP3 configuration.
Display Logging
Configuration.
.
Display remote logging
configuration.
.
Display logging facility
configuration.
.
Display logging
configuration.
.
Display ipv6 logs
configuration.
Display Remote
management
configuration.
Display remote
management over
https configuration.
Display SNMP
configuration.
Display system status.
Displays the resources
being used in the
system currently.
Display TimeZone
Configuration.
19