Net Radvd Pool Add; Net Radvd Pool Edit <Row_Id - D-Link DWC-2000 Cli Reference Manual

10 preference
11 mtu
12 life_time

7.19 net radvd pool add

Command
S.No
Name
1 save
2 exit
3 cancel
4 prefix_type
5 sla_id
6 prefix_address Specifies the IPv6 network address.
7 prefix_length
8 prefix_life_time
7.20 net radvd pool edit <row_id>
Command
S.No
Name
<row_id>
1
2 save
3 exit
4 cancel
non-address) Auto configuration information.
Choose between low/medium/high for the
preference associated with this Controller's
RADVD process
This is used in RA's to ensure all nodes on
the network use the same MTU value in the
cases where the LAN MTU is not well known.
The default is 1500.
The lifetime in seconds of the route. The
default is 3600 seconds.
Description
Saves the radvd Pool configuration changes.
Saves the radvd Pool configuration changes and
exits current mode.
Rolls back the radvd Pool configuration changes.
Selects the prefix type either as 6to4 or
Global/Local/ISATAP.
The SLA ID (Site-Level Aggregation Identifier) in
the 6to4 address prefix is set for the interface ID on
which the advertisements are sent.
The prefix length variable is a decimal value that
indicates the number of contiguous, higher order
bits of the address that make up the network
portion of the address.
The length of time over which the requesting router
is allowed to use the prefix.
Description
radvd Pool configuration mode.
Saves radvd Pool configuration changes.
Saves radvd Pool configuration changes and exits
current mode.
Rolls back radvd Pool configuration changes.
98
radvd preference
type.
MTU size.
Unsigned
integer.
Type and
Description
ipv6 prefix
type.
Unsigned
integer.
String.
Unsigned
integer.
Unsigned
integer.
Type and
Description
Unsigned
integer.