Util System_Check Capturepackets Download <Filename> <Ipaddr; Util Schedule-Reboot <Enable_Reboot; Util Usb_Test <Ipaddr> <Filename; Util Backup_Configuration <Filename> <Ipaddr - D-Link DWC-2000 Cli Reference Manual

1 <interface>
5.5 util system_check capturePackets download <fileName> <ipAddr>
S.No Command Name
1 <fileName> <ipAddr>
5.6 util schedule-reboot <enable_reboot>
S.No Command Name
1 <enable_reboot>
5.7 util usb_test <ipAddr> <fileName>
S.No Command Name
1 <ipAddr> <fileName>
5.8 util backup_configuration <fileName> <ipAddr>
S.No Command Name
<fileName> <ipAddr>
1
5.9 util restore_configuration <IpAddr> <FileName>
S.No Command Name
1 <IpAddr> <FileName>
5.10 util firmware_upgrade <IpAddr> <FileName>
S.No Command Name
1 <IpAddr> <FileName>
6.0

Configuration commands under branch QOS

Enter "util system_check capturePackets
Start the packet
capture. avail_interfaces" command to get the available
interfaces for packet capture.
Description
Download the packet
capture to the host
machine.
Description
Reboot the system.
Description
To test the USB.
Description
Download the backup
configuration file to the
host machine.
Description
For restoring the
configuration.
Description
For upgrading the
firmware.
Type and Description
String
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
Type and Description
Boolean choice.
Type and Description
String.
Type and Description
String
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
Type and Description
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
String.
Type and Description
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
String.
73