Fuses - BMW G 650 GS Sertão Rider's Manual

bination with front-wheel ad-
apter (83 30 0 402 242).
Loosen the fastening screws 1.
Push the two adapters 2 apart
until the front forks fit between
them. Adjust the adapter studs
to suit the front suspension.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Install rubber buffers 4 in the
top positions on left and right.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten securing screws 1.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.

Fuses

Removing fuse
Any attempt to jumper a
defective fuse gives rise to
the risk of a short-circuit and fire.
Always replace a defective fuse
with a new fuse of the same
amperage.
Switch off the ignition.
Remove the seat (
8
81
z
38).