BMW G 650 GS Sertão Rider's Manual page 97

Remove screws 1 and 2.
Remove screw 3.
Pull the side panel at 4 out of
the mount and remove.
Installing right side panel
Slip the side panel behind top
section of fairing 5, then seat it
in mount 4.
Install screw 3.
Install screws 1 and 2.
Install the centre trim panel
( 94).
Removing left side panel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the centre trim panel
( 94).
8
95
z