BMW G 650 GS Sertão Rider's Manual page 88

8
86
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
z Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.
Replacing bulb for rear
light and brake light
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.