Drill Chuck - Makita DP2010 Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY

[3] -1. Drill Chuck

DISASSEMBLING
(1) Remove Drill chuck as drawn in Fig. 2.
Fig. 2
1. Fix Wrench 10 to Vise.
3. Attach 1R220, 1R222 and Bit adapter as follows:
(1) Attach 1R222 to 1R220.
(2) Attach 1R220 to 1R219.
(3) Attach Bit adapter to 1R222.
1R219
1R222
1R220
ASSEMBLING
Assemble Drill chuck by reversing the disassembly procedure. (Refer to Fig. 2.)
Note: Set the fastening torque of 1R219 to 9.8 N·m to 14.7 N·m (100 Kgf·cm to 150 Kgf·cm) and turn 1R219 clockwise.
Wrench 10
Vise
Bit adapter
2. Insert 1R231 into Drill chuck and set Drill chuck
to Wrench 10.
Drill chuck
1R231
4. Turn 1R219 counterclockwise to remove
Drill chuck.
1R219
1R231
Drill chuck
P 3 / 9
Wrench 10