Makita DP2010 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Spindle section (cont.)
ASSEMBLING
(1) Assemble Ball bearing 6900LLB to Spindle and secure the bearing with Retaining ring S-10.
Refer to the drawings on the bottom of Fig. 4.
(2) Assemble Helical gear 34 as drawn in Fig. 5.
Fig. 5
1. Insert Spindle into 1R033.
Spindle
1R033
(3) Assemble the above Spindle section to Housing set (L). (Refer to
[3] -3. Armature
DISASSEMBLING
(1) Separate Housing set (R) from Housing set (L) by loosening seven 4x18 Tapping screws as drawn in Fig. 3.
(2) Disassemble Armature from Housing set (L). (Refer to Fig. 6.)
Fig. 6
1. Separate Brush holders from Armature's
commutator and take out Armature
together with Field.
Brush holders
Arbor press
2. Separate Armature from Field.
Field
2. Put 1R029 on Helical gear 34 and press-fit
them to set Helical gear 34 to Spindle.
3. Press-fit Ball bearing 696ZZ.
1R029
Ball bearing 696ZZ
Helical gear 34
Spindle
Fig. 3.
)
Armature
Housing set (L)
P 5 / 9