Makita DP2010 Instruction Manual
High speed drill
Hide thumbs
Also See for DP2010:
- Instruction manual (41 pages) ,
- Technical information (9 pages) ,
- Instruction manual (33 pages)
Related Manuals for Makita DP2010
Summary of Contents for Makita DP2010
- Page 1 INSTRUCTION MANUAL High Speed Drill DP2010 DP2011 013705 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
EC Declaration of Conformity ENG905-1 Makita Corporation responsible Noise manufacturer declare that the following Makita typical A-weighted noise level determined machine(s): according to EN60745: Designation of Machine:... - Page 3 Do not abuse the cord. Never use the cord for The technical documentation is kept by: carrying, pulling or unplugging the power tool. Makita International Europe Ltd. Keep cord away from heat, oil, sharp edges or Technical Department, moving parts. Damaged or entangled cords Michigan Drive, Tongwell, increase the risk of electric shock.
-
Page 4: Drill Safety Warnings
Power tool use and care exposed metal parts of the power tool "live" and 18. Do not force the power tool. Use the correct could give the operator an electric shock. power tool for your application. The correct Always be sure you have a firm footing. power tool will do the job better and safer at the Be sure no one is below when using the tool rate for which it was designed. -
Page 5: Functional Description
Installing or removing drill bit trigger. Release the switch trigger to stop. For Model DP2010 For continuous operation, pull the switch trigger, push in the lock button and then release the switch trigger. -
Page 6: Operation
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 013714 Drilling operation Drilling in wood When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. -
Page 7: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Chuck key • Chuck key holder •... - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 885203-221...