Changing Display Backlight Color - Metra Electronics 99-3010S Installation Instructions Manual

INSTALLATION INSTRUCTIONS FOR PART 99-3010S
Changing Display
Backlight Color
1. Press the front defrost button for 5 seconds,
this will engage the "Configure Backlight
Color" mode. Note, backlight will blink while
in this mode. (Figure A)
2. Create your backlight color (Figure A):
• Press and hold the "Face" button to
increase Red.
• Press the "Foot" button to decrease Red.
Red Green
Color Level Up
Color Level Down
(Figure A)
METRA. The World's best kits.
• Press and hold the "Face/Foot" button to
increase Green.
• Press and hold the "Def/Foot" button to
decrease Green.
• Press and hold the "Fan Up" button to
increase Blue.
• Press and hold the "Fan Down" button to
decrease Blue.
3. After you have your desired color stop
pressing the button(s) and the blinking will
stop leaving your desired color. (Figure A)
Blue
Press and hold to enter
"Configure Backlight Color" mode
™ 1-800-221-0932 metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
K P
NOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians