Table of Contents
Advertisement
Disassembly
Removing and Replacing the Transceiver Board
G
26
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery, SIM, and rear housing as described in the procedures
2.
Using the flat end of the disassembly tool, carefully loosen the transceiver
board from the front housing.
FRONT HOUSING
Figure 14. Removing the transceiver board
3.
Lift the transceiver board completely away from the front housing as shown
in Figure 14.
4.
To replace, align the transceiver board with the front housing and gently press
into place.
Ensure the keypad is correctly positioned in the front housing relative to the
transceiver board. Verify operation of the keys after replacing the transceiver board.
5.
Replace the rear housing, SIM, and battery as described in the procedures.
August 01, 2001
Product Family C25 and C43
TRANSCEIVER BOARD
DISASSEMBLY TOOL
T191_pcb_rem.eps
6881039B15
.
Advertisement
Table of Contents
Troubleshooting
