Dell S320 User Manual page 63

LAN S
ETTINGS
menu provides the following options:
W
function.
DHCP—If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select
DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask,
and Gateway. Use
Mask, and Gateway. Key in enter to confirm each number and then use
and
IP A
projector connected to the network.
S
G
administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S
settings.
Downloaded From projector-manual.com DELL Manuals
—Select and press
A LAN—Select Enabled to activate the Wireless and LAN
IRELESS ND
to set the next item.
—Automatically or manually assigns the IP address to the
DDRESS
M —Configure the Subnet Mask of the network connection.
UBNET ASK
—Check the Gateway address with your network/system
ATEWAY
—Press to save the changes made in network configuration
TORE
NOTE:
1. Use
and
Gateway, DNS, and Store.
2. Press the
DNS to set the value. (The selected option is highlighted in blue)
a Use
b Use
c After the setup is complete, press the
to activate LAN settings. The LAN settings
and to select the number of IP address, Subnet
button to select IP Address, Subnet Mask,
button to enter IP Address, Subnet Mask, Gateway or
and button to select the option.
and button to set the value.
button to exit.
Using Your Projector 63