McQuay IM 702-3 Installation And Maintenance Manual page 8

Microtech iitm applied rooftop unit controller and self-contained unit controller lonworks communication module

Table of Contents

9. Push the board onto the connector pins and standoffs until you hear the faint click of the locking standoffs securing the

module in place.

10.Connect the MicroTech II LonWorks Communications Module to the network.

a. Replace the network plug in P8. See Figure 3.

11.Reconnect the network to TB 2 terminals 128 and 129 if it is necessary.

Figure 4. MicroTech II Applied Rooftop Unit Controller Main Control Board

Main Control Board

Terminal Block Connector

Connector

Location of Standoff

(4 places)

IM702-3

Table of Contents