Statically Assign An Ip Address - D-Link DAP-2360 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows 2000: Click on Start > Settings > Control Panel > Network Connections
®
XP: Click on Start > Control Panel > Network Connections
Windows
®
Windows Vista : Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage network
®
connections
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address
on your router.
Example: If the router's LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2
and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP
address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may
D-Link DAP-2360 User Manual 91