Advanced Settings; Performance - D-Link DAP-2360 User Manual

Section 3 - Configuration
Wireless: Use the drop-down menu to turn the wireless
function On or Off.
Wireless Mode: The different combination of clients that can
be supported include Mixed 802.11n, 802.11g
and 802.11b, Mixed 802.11g and 802.11b
and 802.11n Only. Please note that when
backwards compatibility is enabled for legacy
(802.11g/b) clients, degradation of 802.11n
wireless performance is expected.
Data Rate*: Indicate the base transfer rate of wireless adapters
on the wireless LAN. The AP will adjust the base
transfer rate depending on the base rate of
the connected device. If there are obstacles or
interference, the AP will step down the rate. This
option is enabled in Mixed 802.11g and 802.11b
mode. The choices available are Best (Up to 54),
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1.
*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate.
D-Link DAP-2360 User Manual

Advanced Settings

Performance

30