Configuration - D-Link DAP-2360 User Manual
Hide thumbs
Also See for DAP-2360:
- User manual (84 pages) ,
- Quick installation manual (49 pages) ,
- Command line interface reference manual (46 pages)
Table of Contents
Advertisement
Section 3 - Configuration
Configuration
To configure the DAP-2360, use a computer that is connected to the DAP-2360 with an Ethernet cable (see the Network Layout
diagram ).
Launch your web browser.
Type the IP address of the DAP-2360 in the address field (http://192.168.0.50) and
press Enter. Make sure that the IP addresses of the DAP-2360 and your computer are
in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-2360, make sure to enter the correct IP address.
Enter the user name (admin) and your password. Leave the password field blank by default and click Login.
Note: If you have changed the password, make sure
to enter the correct password.
D-Link DAP-2360 User Manual
15
Hide quick links:
Advertisement
Table of Contents
