Brother MFC-5460CN User Manual page 60

Error Message Cause
The machine's memory is full.
Out of Memory
Paper is jammed in the machine.
Paper Jam
The machine has a mechanical
Print Unable XX
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Scan Unable XX The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Paper is not the correct size.
Wrong Paper Size
A non-PictBridge compatible or
Wrong USB
broken device has been connected
Device
to the PictBridge port.
Troubleshooting and Routine Maintenance
Action
Fax sending or copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
Printing operation in progress
Reduce print resolution. (For details, see
®
Printing for Windows in the Software User's
-
Guide on the CD ROM.)
See Printer jam or paper jam on page 55.
Open the scanner cover and remove any foreign
objects inside the machine.
If the error message continues, before
disconnecting the machine so you will not lose
any important messages. Then, disconnect the
machine from the power for several minutes and
then reconnect it.
Open the scanner cover and remove any foreign
objects inside the machine.
If the error message continues, before
disconnecting the machine so you will not lose
any important messages. Then, disconnect the
machine from the power for several minutes and
then reconnect it.
Load the correct size of paper (Letter, Legal or
A4), and then press Mono Start or
Colour Start.
Unplug the device from the PictBridge port, then
press Power Save to turn the machine off and
then on again.
53