Important Tips - Hayward Navigator V-Flex Owner's Manual

IMPORTANT TIPS

Periodically check the water flow/vacuum to be sure that your
Remember, too much vacuum is just as bad as too little.
Periodically check to make sure that the Cleaner hose is securely
attached to its suction source (i.e. Skimmer, Skimmer Vac Plate,
Vac Lock, etc.)
Disconnect the Cleaner hose from the Skimmer/Regulator Valve,
"backwashing", so as not to restrict water flow.
DO NOT COIL HOSE
When storing your Cleaner, the hose sections must be stored
straight. A coiled hose will create a memory in the hose that will
impede the Cleaner's ability to move properly.
Coiled hoses are not covered under the Hayward Warranty.
Use only original Hayward spare parts and hoses to insure proper
operation.
14
When the Cleaner is out of the pool, always disconnect the leader
hose from the Cleaner's head.
Do not add chemicals
to the pool while cleaner
is in the pool.
Do not swim while cleaner is in
the pool.
15