Mounting Welding Generator; Connecting The Battery - Red-D-Arc D502K 5+4 Technical Manual

4-3. Mounting Welding Generator

Tools Needed:
9/16 in

4-4. Connecting The Battery

Tools Needed:
1/2 in
D502K 5+4
1
Y Connect Negative (–) Cable Last.
+
–
1
Welding Unit In Place
Bolting Unit In Place
2
3
.
Y Do not weld on base. Weld-
ing on base can cause fuel
tank fire or explosion. Weld
only on the four mounting
brackets or bolt unit down.
1 Mounting Bracket
2 1/2 in Bolt And Washer
(Minimum – Not Supplied)
3 3/8-16 x 1 in Screws
(Supplied)
To Weld Unit In Place:
Weld unit to truck or trailer only at
the four mounting brackets.
To Bolt Unit In Place:
Remove hardware securing the
four mounting brackets to the base.
Reverse brackets and reattach to
base with original hardware.
Mount unit to truck or trailer with 1/2
in (12 mm) or larger hardware (not
supplied).
803 122 / Ref. 802 169-B
Reinstall cover after connecting battery.
802 168-E / Ref. 202 705 / 802 313 / S-0756-C
TM-4412 Page 9