Labels - Craftsman 315.228310 Owner's Manual

When Mounting an Auxiliary Fence Face, Position Mounting Hardware Beyond Arrow at Right and Left as Indicated.
Keep Fasteners Away From Blade.
Do Not Lift Saw With Rails
or Extension Tables.
F
WARNING
Attach Blade Guard
•
Assembly Before
Operating this Saw
•
Read Owners
Manual
0°
• For your safety, read owners manual before
• Wear eye protection.
Turn Clockwise to Raise
• Keep blade guard down and in place for through
Blade.
• Keep hands out of path of saw blade.
• Do not perform any operation freehand.
• Know how to reduce the risk of kickback.
Turn Counterclockwise to
• Never reach around or over saw blade.
Lower Blade.

LABELS

WARNING
D
operating saw.
cuts.
See instructions for ripping.
C
Debris on rail can misalign
the rip fence. Workpiece
could bind or suddenly
kick back. You could be
hit or cut. Clean debris
off fence rail before
positioning fence.
G
PULL ON
PUSH OFF
H
WARNING
• When ripping, use push stick when fence is set
2 inches or less from blade.
• When ripping, use push block and auxilary fence
when fence is set between 1/2 and 2 inches from
blade. Do not make rip cuts narrower than 1/2 inch.
• Turn off tool and wait for saw blade to stop before
moving workpiece or changing settings.
• Disconnect the saw from the power source before
changing blade or servicing.
• Do not expose to rain or use in damp places.
15
E
WARNING
Turn Clockwise to
Increase Blade
Angle.
0
45
Fig. 4 b
® TABLE SAW 315.228310