Videconvcp451&Vhcd 860 - BBV Rx10X Installation Manual

Protocol 05
VideconVCP451&VHCD 860
Variable speed Pan/Tilt.
16 Full scene presets.
2 Rx10X preset patrols.
Pattern Tour 1 learn and playback using AUTOPAN
Privacy zone support
IR Filter CUT using LIGHTS. Lights ON = FILTER OFF, Lights OFF = FILTER ON
Videcon Dome
Display MENU
Display Privacy Menu
Record Pattern Tour 1
Stop Recording
Pattern Tour 1 playback = press AUTOPAN
The dome and Rx10X are linked using RS485 for control and video for the camera signal.
RS485 control of dome using the following connections:
Description
Dome Connection
D +
D -
Notes:
The dome switches must be as follows to select Pelco P, 9600 baud and address 1.
SW1, 1 ON, 2-7 OFF. SW2, 1 & 2 ON, Protocol switch 1-4 all OFF
When navigating the dome's menu or privacy setup use the joystick and IRIS OPEN and CLOSE.
The dome manual has detailed information on the menu structure and privacy setting.
Options Function
Option 1 Enable datum mode goto preset 1 after 5 minutes if inactivity.
Option 2 ON to allow LIGHTS to switch the IR CUT filter ON/OFF when used with a day/night dome.
Rx10X installation manual V3.02
Rx10X
DATA + J6/5
-
J6/4
DATA
J6/3
Gnd
J6/2
J6/1
Tx40X Tx1000
'#' 1 '#' WASH
'#' 2 '#' WIPE
'#' 3 '#' AUTOPAN
'#' 4 '#' LIGHTS
Tx1500
1 '#'
2 '#'
3 '#'
4 '#'
Page 31