Panasonic Wv-Csr400, Wv-Csr600 & Wv-Csr650 - BBV Rx10X Installation Manual

Protocol 09
Variable speed Pan/Tilt.
Zoom/Focus, Auto focus, Iris Open/Close
16 full scene presets
2 preset patrols
Autopan
WV-CSR400 WV-CSR600 & WV-CSR650
ENTRY/EXIT dome menu
SET (select menu item)
ESC (back to previous menu)
SPECIAL2 (for special menus)
Autopan is started by selecting Autopan on the Transmitter. The Autopan stops can be programmed from within the dome
menu. Please refer to dome user manual for exact details.
RS485 control of dome using the following connections:
Description
Dome Connection
Green DATA +
Yellow
DATA
Notes:
IMPORTANT: Dome settings: Select dome address 01. Communications must be 19200, N, 8, 1. If dome cannot be
controlled, see dome manual section to reset dome to factory default.
Options Function
Option 1 Enable datum mode goto preset 1 after 5 minutes if inactivity.
Rx10X installation manual V3.02
Panasonic WV-CSR400 series.
WV-CSR600 series.
WV-CSR650 series.
(Auto focus with 600 & 650 series)
(600 & 650 series dome)
(600 & 650 series dome)
(600 & 650 series dome)
Rx10X
J6/5
-
J6/4
Gnd J6/3
J6/2
J6/1
Tx40X Tx1000
'#' 1 '#' WASH
'#' 2 '#' WIPE
'#' 3 '#' AUTOPAN
'#' 4 '#' LIGHTS
Tx1500
1 '#'
2 '#'
3 '#'
4 '#'
Page 23