Table of Contents
Advertisement
≥ If you press the
button halfway and then
fully, the subject is focused when the button is
pressed halfway. (VDR-D310)
≥ When you press the
focus mode, the subject is focused just before
recording. (VDR-D310)
To stop the timer midway through
Press the MENU button. (The self-timer setting is
cancelled.)
≥ If you turn off the power, the self-timer standby
mode is cancelled.
≥ Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
Recording guideline
function
Checking if the image is level.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
You can check if the image is level while
recording by using the lines displayed on the
screen.
¬ Rotate the mode dial to select
.
Press the MENU button, then select
[BASIC] # [GUIDE LINES] # [ON]
and press the joystick.
To cancel the Recording guideline
function
Press the MENU button, then select [BASIC] #
[GUIDE LINES] # [OFF] and press the joystick.
≥ The guidelines do not appear on the images
actually recorded.
≥ The guidelines are not displayed while rotating
the LCD monitor frontward to record yourself.
button fully in auto
or
MENU
Wide mode
This is for selecting the screen's
aspect ratio when recording motion
pictures.
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
This allows you to record images compatible with
wide-screen TVs (16:9) and regular TVs (4:3).
∫ Recording images with a 16:9
aspect ratio
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [REC ASPECT] > [16:9]
and press the joystick.
∫ Recording images with a 4:3
aspect ratio
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [REC ASPECT] > [4:3]
and press the joystick.
≥ The default setting is [16:9].
Image stabilizer function
This is for reducing image shakes
during recording.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
Reduces the image shaking due to hand
movement when recording.
¬ Rotate the mode dial to select
.
Recording
.
MENU
.
or
51
LSQT1161
Advertisement
Table of Contents
