Switching Off The Pedelec; Battery Charge Level - Derby cycle Impulse 2.0 pedelec Original User Manual

Down tube battery: After switching on, wait five seconds
before you set off. Otherwise, you will not be provided with
the full assist level.
6.3.2 Switching off the pedelec
On the easy-reach control
1. Press the button on the easy-reach control for one second.
The Impulse 2.0 system switches off.
Via the battery
1. Briefly press the battery button twice. The Impulse 2.0 system
switches off after a few seconds.
You can switch off your Impulse 2.0 pedelec from any level
in the menu. You do not have to display the start menu to do
this.
The last configured settings remain saved.
If the pedelec remains stationary for about 20 minutes the
Impulse 2.0 switches itself off.
6.3.3

Battery charge level

The battery charge level is shown in the top right of the display.
Information is displayed on a battery-shaped icon with seven segments,
telling you how full the battery is charged. The lower the battery charge
level, the fewer segments are displayed. If the battery falls below the
minimum charge level, the assist function is also switched off by the
motor.
DISPLAY BATTERY CHARGE LEVEL
100 – 85.5%
85.5 – 71.5 %
71.5 – 57.5 %
57.5 – 42.5 %
42.5 – 28.5%
28.5 – 14.5%
The value displayed can change quickly when the
circumstances change, such as when riding up an incline
after a long, flat stretch.
Original User Guide | Impulse 2.0 Pedelec Version 3 EN-41