Table of Contents
Advertisement
If you need to add some, put in only enough of the
correct fluid to bring the level up to the FULL mark
(if you have the dipstick) or so you can see fluid in the
glass, if you have a sight glass.
6-28
What to Use
To determine what kind of fluid to use, see
"Recommended Fluids and Lubricants" in the Index.
NOTICE:
When adding power steering fluid or making a
complete fluid change, always use the proper
fluid. Failure to use the proper fluid can cause
leaks and damage hoses and seals.
If your power steering fluid level is low, this can
cause the PRIMARY BRAKE or AUX BRAKE
warning lights to come on. If either light remains
on after you have added power steering fluid to
the proper level, then shut off the engine for
10 seconds. This should reset the brake warning
lights. If one or both lights stay on, though,
then see "Hydraulic Brake Warning Lights" in
the Index.
Advertisement
Table of Contents
