Chevrolet 2000 C-Series Owner's Manual page 68

Eaton Fuller Transmission with Clutch
Brake (Option)
Some vehicles have an optional clutch brake. It engages
when you push your clutch pedal all the way to the
floor. Use it when you shift into first or reverse gear.
Press the clutch pedal as far as it will go and then make
your shift. If the engagement isn't smooth when you
engage the clutch, press the clutch pedal in and then
-
immediately re engage it. Use the clutch brake only
with the engine idling and the vehicle standing still.
If you have this feature, see the Eaton Fuller
Transmission Driver Instructions Manual before
operating your vehicle.
Eaton Fuller Transmission with
Countershaft Brake (If Equipped)
The countershaft brake is used when you shift from a
standing start into FIRST (1) or REVERSE (R). You
will find this feature on vehicles with gasoline engines
-
and Eaton Fuller 9 or 10 speed transmissions.
See the Eaton Fuller Transmissions Driver
Instructions Manual.
2-24
CAUTION:
If you skip a gear when you downshift, you could
lose control of your vehicle. You could injure
yourself or others. Don't shift down more than
one gear at a time when you downshift.
Parking
CAUTION:
If you don't park your vehicle properly, it can
roll. If you've left the engine running, it can move
very quickly. You or others could be injured.
To be sure your vehicle won't move, even when
you're on level ground, follow the steps below.