Table of Contents
Advertisement
To apply the parking brake, pull the knob toward you.
Then shift the transmission to NEUTRAL (N) or PARK (P).
Push the knob in to release the parking brake.
The ignition must be in ON and the shift lever out of
PARK (P) in order to release the parking brake.
The parking brake will automatically apply if the ignition
is turned off and in PARK (P) and will also apply (will not
release) if the vehicle's battery is dead or disconnected.
If your vehicle has this
system, you will have a
knob located to the right of
the steering column.
The PARK BRAKE light may flash while the parking
brake is being applied or released. This is normal for
this system.
If your vehicle needs towing or the parking brake will
not release, the towing operator will need to disconnect
the propshaft before towing your vehicle. See "Towing
Your Vehicle" in the Index.
Air Brake (If Equipped)
CAUTION:
When the yellow SYSTEM PARK and the red
TRAILER AIR SUPPLY knobs are both pushed
in, your rig will be free to move. It could strike
someone or something. When both of these knobs
are pushed in, either hold the regular brake
pedal down or, if you have it, pull out the blue
TRACTOR PARKING knob, to keep your rig
from moving.
2-27
Advertisement
Table of Contents
