Chevrolet 2000 C-Series Owner's Manual page 185

4. Then fill the coolant recovery tank to the HOT
LEVEL mark on the vehicle with the specialty hood,
-
or approximately one
the sloped hood.
5. Put the cap back on the coolant recovery tank, but
leave the radiator pressure cap off.
5-26
half full on the vehicle with
6. Start the engine and
let it run until you can
feel the upper radiator
hose getting hot. Watch
out for the engine
cooling fan(s).
7. By this time, the coolant level inside the radiator
filler neck may be lower. If the level is lower, add
more of the proper DEX
through the filler neck until the level reaches the
base of the filler neck.
8. Then reinstall the pressure cap. At any time during
this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrows on the pressure cap line up like this.
R
-
COOL coolant mixture