Planet GS-4210 SERIES User Manual page 46

1. Deposit the Planet Smart Discovery Utility in administrator PC.
2. Run this utility as the following screen appears.
If there are two LAN cards or above in the same administrator PC, choose a different LAN card
by using the "Select Adapter" tool.
3. Press "Refresh" button for the currently connected devices in the discovery list as the screen shows below:
1. This utility shows all necessary information from the devices, such as MAC Address, Device Name, firmware version and
Device IP Subnet address. It can also assign new password, IP Subnet address and description to the devices.
Figure 3-1-6: Planet Smart Discovery Utility Screen
Figure 3-1-7: Planet Smart Discovery Utility Screen
46
User's Manual of GS-4210 Series