Table of Contents
Advertisement
Use
Install the tool as required.
u
To increase working distance and accuracy, place the
u
laser in the middle of your working area. Brightness of
area may affect line visibility.
Be aware that extreme temperature changes can cause
u
movement or shifting of building structures, tripods, equip-
ment, etc. This may affect accuracy. Verify your setup
before each use as the laser may have moved.
Switching on and off (fig. F)
To switch the tool on, slide the on/off switch (1) to the right.
u
To switch the tool off, slide the on/off switch to the left.
u
Selecting the operating mode (fig. F)
For projecting a single laser beam scanning a third of a
u
circle, slide the operating mode selector (2) to the left.
For projecting a triple laser beam scanning a a full circle,
u
slide the operating mode selector (2) to the right.
Maintenance
Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and remove the battery from the appliance/tool
u
if the appliance/tool has a separate battery pack.
Regularly clean the ventilation slots in your appliance/tool
u
using a soft brush or dry cloth.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
(Original instructions)
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Voltage
V
dc
Battery size
Laser class
o
Operating
C
temperature
Weight
kg
ENGLISH
LZR4
(H 1)
9
6LR61
2
0-40
1.5
5
Advertisement
Table of Contents
