Download Print this page

Maintenance; Service Information; Full Two-Year Home Use Warranty - Black & Decker BDL300S Instruction Manual

360 degrees auto laser level
Hide thumbs

Advertisement

586017-00 BDL300S laser
T T
R R
T T
R R
Problem
• Laser does not project on
wall.
• Line only visible on one wall. • Switch in 120° mode.
• Laser beam dim.
STORAGE
To store the unit, reattach the laser to the top of the tripod making sure that it snaps into
place securely. Loosen the locking knob, turn the fine adjust knob to its lowest setting and
return the tripod to its lowest position. Unhinge the legs and fold them into the center.
Reattach the strap around housing. Always store the laser indoors and in its closed state
with the switch in the "OFF" position.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement
parts.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-54-HOW-TO (544-6986).
WARNING:
The use of any accessory not recommended for use with this tool could
be hazardous.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge
in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should
be made within the time period of the retailer's policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check with the retailer for their
specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
authorized Service Center for repair or replacement at our option. Proof of purchase may
be required. Black & Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory and on our website
www.blackanddecker.com.
This warranty does not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state. Should you have any
questions, contact the manager of your nearest Black & Decker Service Center. This
product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-544-6986 for a free replacement.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
7/30/03
8:51 AM
Page 5
O O
U U
B B
L L
E E
S S
H H
O O
O O
T T
O O
U U
B B
L L
E E
S S
H H
O O
O O
T T
Possible Cause
• The self leveling range
for the level line is +/- 5°.
• Weak battery.
5
I I
N N
G G
I I
N N
G G
Solution
• Position tripod ona relatively
smooth and level surface.
• Move switch t 360° mode.
• Replace battery
See 'Tools-Electric'
– Yellow Pages –
for Service & Sales

Hide quick links:

Advertisement

loading