Speedometer And Odometer; Trip Odometer; Tachometer; Safety Belt Reminders - GMC 2008 Yukon Denali Owner's Manual

Speedometer and Odometer

The speedometer lets you see your speed in both miles
per hour (mph) and kilometers per hour (km/h).
The odometer mileage can be checked without the
vehicle running. Simply press the trip stem on the
instrument panel cluster.
If your vehicle ever needs a new odometer installed, the
new one will be set to the correct mileage total of the
old odometer.

Trip Odometer

The trip odometer can tell you how far your vehicle has
been driven since you last set the trip odometer to zero.
Press the reset button, located on the instrument panel
cluster next to the trip odometer display, to toggle
between the trip odometer and the regular odometer.
Holding the reset button for approximately one second
while the trip odometer is displayed will reset it.
To display the odometer reading with the ignition off,
press the reset button.

Tachometer

Your tachometer displays the engine speed in
revolutions per minute (rpm).

Safety Belt Reminders

Safety Belt Reminder Light

When the engine is started, a chime will come on for
several seconds to remind people to fasten their safety
belts, unless the driver's safety belt is already buckled.
This chime and light is repeated if the driver remains
unbuckled and the vehicle is in motion. If the driver's belt
is already buckled, neither the chime nor the light will
come on.
The safety belt light will
also come on and stay on
for several seconds, then it
will flash for several more.
3-33