Speedometer And Odometer; Trip Odometer; Tachometer; Safety Belt Reminder Light - GMC 2005 Sierra Denali Owner's Manual

Speedometer and Odometer

Your speedometer lets you see your speed in both
miles per hour (mph) and kilometers per hour (km/h).
Your odometer shows how far your vehicle has
been driven, in either miles (used in the United States)
or kilometers (used in Canada).
Engine Hour Meter Display
The Driver Information Center (DIC) can also display
the number of hours the engine has run. To display the
engine hours, turn the ignition off, press and hold the
reset button for at least four seconds. The hour
meter will be displayed for up to 30 seconds, or until the
ignition is turned on. See DIC Operation and Displays
on page 3-43 for more information.

Trip Odometer

The trip odometer can tell you how far your vehicle has
been driven since you last set the trip odometer to zero.
Press the reset button, located on the instrument panel
cluster next to the trip odometer display, to toggle
between the trip odometer and the regular odometer.
Holding the reset button for approximately one second
while the trip odometer is displayed will reset it.
To display the odometer reading with the ignition off,
press the reset button.
3-28

Tachometer

Your tachometer displays the engine speed in
revolutions per minute (rpm).

Safety Belt Reminder Light

When the key is turned to RUN or START, a chime will
come on for several seconds to remind people to
fasten their safety belts, unless the driver's safety belt is
already buckled.
If the driver's belt is already buckled, neither the chime
nor the light will come on.
The safety belt light will
also come on and stay on
for several seconds, then it
will flash for several more.