GMC 2008 Yukon Denali Owner's Manual page 252

DVD-V (Video) Display Buttons
Once a DVD-V is inserted, the radio display menu
shows several tag options for DVD playing. Press the
pushbuttons located under any desired tag option during
DVD playback. See the tag options listed after, for
more information.
The rear seat passenger can navigate the DVD-V
menus and controls through the remote control. See
"Remote Control", under Rear Seat Entertainment (RSE)
System on page 3-105 for more information. The
Video Screen automatically turns on when the DVD-V is
inserted into the DVD slot.
r
/ j (Play/Pause): Press either the play or pause
icon displayed on the radio system, to toggle between
pausing or restarting playback of a DVD. If the forward
arrow is showing on display, the system is in pause
mode. If the pause icon is showing on display, the
system is in playback mode. If the DVD screen is off,
press the play button to turn the screen on.
3-90
Some DVDs begin playing after the previews have
finished, although there could be a delay of up to
30 seconds. If the DVD does not begin playing the
movie automatically, press the pushbutton located under
the play/pause symbol tag displayed on the radio. If
the DVD still does not play, refer to the on-screen
instructions, if available.
c (Stop): Press to stop playing, rewinding, or fast
forwarding a DVD.
r
(Enter): Press to select the choices that are
highlighted in any menu.
y
(Menu): Press to access the DVD menu. The DVD
menu is different on every DVD. Use the pushbuttons
located under the navigation arrows to navigate
the cursor through the DVD menu. After making a
selection press this button. This button only operates
when using a DVD.
Nav (Navigate): Press to display directional arrows for
navigating through the menus.
q (Return): Press to exit the current active menu
and return to the previous menu. This button operates
only when a DVD is playing and a menu is active.